GTEN 5G NR OUTDOOR CPE (C120)
Item | Description | |
Technical Standard | Cellular | 3GPP Release 15 |
Bluetooth | BLE 5 | |
Chipset | Qualcomm Snapdragon X55 | |
Nordic nRF52833 | ||
ROM/RAM | 4Gbits ROM and 4Gbits RAM | |
Physical Interfaces | 1x LAN Port | 2.5GE Support PoE IEEE 803.3AT |
1x Micro Sim Slot | 1x Sim slot. 1x M2FF Embedded Sim. (Optional) | |
1x USB Port | USB3.0 Type-C (for debugging purpose) | |
1x Rest Key | For Hardware resetting. | |
5x LED Indicators | - 3 LEDs for Signal Strength (3 bars) - Network Service (5G or 4G) - Power | |
Antennas | 4 x omni-directional antennas | For 360° Signal reception enables easier installation. They are with up to 5dBi Gain. |
2x directional antennas | For enhancement on 5G Sub-6 Bands of N40/N41/N77/N78/N79 with up to 9dBi gain. | |
1x BLE | For BLE antenna. | |
Cellular Capability | Mode | NSA and SA |
Bands/CA | 5G NR: N1/3/5/7/8/28/40/41/78/79, etc.; Support most of the main combination. To be discussed. | |
Modulation | Sub-6 UL: 256QAM, DL: 256QAM LTE DL:1024QAM, UL:256QAM | |
MIMO | - 4 x 4 MIMO downlink - 2 x 2 MIMO uplink | |
Environmental | IP Rating | IP65 Compliant |
Lightning Surge Protection | 6KV | |
Temperature | - Working Range -20 to 60°C/5-95% Humidity - Storage Range -40 to 85°C/5-95% Humidity Support Pre-heating mechanism in low temperature environment. | |
Mounting Methods | - Mounting on Wall (Special design for allowing horizontal 110° adjustment) - Mounting to a pole | |
PoE Adapter | Input | AC/DC Power supply: AC 100V-240V |
PoE type | Passive PoE DC 48V / 0.5A | |
RJ45 | PoE Port (To Outdoor CPE) | |
LAN Port (To Indoor Router) | ||
Power consumption | <16.8W | |
Dimensions | 225*130*45mm |
